Braking systems of trains

Service braking perform staging crane operator's hands in the V position with exposure in this position until the pressure drop in the equalization tank at 0.5-0.6 kg/cm2 and then transfer it to the position of VA; after obtaining the necessary discharge faucet is transferred to the position of IV .

Repeat steps produce a V brake handle position of the crane operator. The driver of the locomotive at the head of the service brake on the radio for 10-15 passes with the engineer of the locomotive tail command "Prepare to inhibition of a step ..." and calls the upcoming stage of inhibition (eg, 0.8 kg/cm2), and the locomotive engineer of the tail must answer "Got it. To prepare for the inhibition of the stage ... "and repeats the step of inhibition. Performing a service brake, the driver of the locomotive head at the same time on the radio sends the command "Braking" the engineer of the tail of the locomotive. This command produces the locomotive engineer of the tail discharge equalizing reservoir at a specified level.