Brake trains

Exit piston rod brake cylinders for passenger cars envelope RIP brake type CI is set within 105-115 mm, with full braking and 50-70 mm in steps. Reduction rules out stock compared with the existing conventional passenger cars accelerates release the brakes on the train, because at lower output stock is reduced for air braking. This does not happen jamming wheelsets, because the Type CI pressure in the brake cylinders are not dependent on the release rod. In order to make the process of inhibition during the train survived the limit output piston rod, an appropriate distance from the actuator body to automatically control lever transmission. This size should be chosen for the car by multiple tests of braking and leave, as it depends on the tolerances in the regulatory mechanism avtoregulyatora and drive.